Colours available.




The range of colours available is dependent on which method is used to colour the kerbing.
The colour can be added as a coloured oxide mixed in with the entire concrete mix. The first range of colours below are coloured oxide colours.

Alternatively, a colour hardener can be applied as a thin layer as a coating over the surface of the kerb. These colours are in the second range of colours below.

Textured surfaces usually have a second colour added to show the texture, which is added as a coloured release agent, and applied by a textured roller. Release agent colours are shown in the second colour range too.

Mix in Granual Colour Selector

Clay	Island Red	Sharky Grey	Moor
Wheat	Cranberry	Slate Grey	Terracotta
Sandstone	Flagstone	Tuscany	Palimino
Zimt	Cappuccino	Golden Sands	Charcoal
Kahlua	Lime Stone	Pumpkin	Sierra
Sunset	Brick Red	Rustic	Graphite
Harvest Gold

Colour Hardener and Release Agent Colour Selector 1 = Colour Hardener 2 = Release Agent

Bluegum 1	French Grey 1,2	Slate Grey 1,2	Charcoal 1,2
Black 1,2	Dark Brown 2	Brick Red 1,2	Marigold 2
Terracotta 1,2	Coffee 1,2	Light Brown 1	Tan 1,2
Apricot 1	Sahara 1,2	Fawn 1,2	Buff 1,2
Clay 1	Sandstone 1	Bone 1	Ice Green 1,2
Jade Green 1	Heritage Green 1,2	Burgandy 1	Sandstone 1
Cappuccino 1	Vintage Buff 1

Note*: The colours featured on this website are only an indication of what can be achieved using Colourcrete Mix-In Granules, Colour Hardener and Release Agents. These colours may vary slightly due to the variation of display sofware and hardware. Different cements, sands, aggregates, mixing and job site conditions, along with contractors finishing techniques can alter colour. Concrete is produced from natural materials so variation in surface colour common to uncoloured concrete also impacts coloured concrete.